Shaker Cards – Page 3

One Background Three Slimline Holiday Cards

October 14, 2020 / CATEGORIES - Cards, Other, Shaker Cards, Winter Holidays

Snowflakes, Background, Slimline, Holiday Cards, Studio Katia,Christmas,Hanukkah, Happy Celebrations, Card Making, Stamping, Die Cutting, handmade card, ilovedoingallthingscrafty, Stamps, how to, blue, gold,Chunky Alphabet,

Hello, my friends! Have you started on your Holiday Cards yet? Today I’m sharing 3 Holiday cards made from one background. My examples include a Hanukkah card, and Winter Card, and a Christmas Card, just to make sure I have all my friends covered this festive season.

CARD DETAILS

All of these cards began with creating a simple snowflake patterned background using the SNOWFLAKES stamp set with a gold emb. pwd. onto an 8.5 x11 piece of dark blue cardstock. I then sliced the paper into 3 equal parts and then die cut each panel using the large frame from the DOTTED SLIMLINE – SET 2.
On this first card, I die cut all the letters using the CHUNKY ALPHABET to spell out Christmas. I then used the same gold embossing powder to add some thickness to the letters. Next, I die cut a piece of vellum using the scalloped slimline frame from the DOTTED SLIMLINE – SET 2 to soften the background and to add my sentiments too. I then stamped the Merry from the POINSETTIA BORDER set and heat embossed it as well.

As a finishing touch, I added a few GOLD FOIL PEARLS, and this first card is done!

For this next winter slimline, I die cut the center of the panel using a frame from the DOTTED SLIMLINE – SET 2 to create a window for the shaker card. To the back of the panel, I added a piece of acetate and then created a border using BLACK FOAM TAPE and then filled the area using CRYSTAL STARS and SPARKLING SEA CONFETTI MIX.

On a piece of white cardstock, cut slightly smaller than the front panel I stamped the sentiments celebrate winter using stamps from the POINSETTIA BORDER set. I then closed the shaker window using the stamped sentiment panel and then glued that finished piece to the card base. Once again I used the GOLD FOIL PEARLS as a finishing detail.

For my final Hanukkah Card, I die cut the oval frame from the snowflake panel using the DOTTED SLIMLINE – SET 1 and glued the oval to the card base. I then stamped out the sentiments using stamps from the HAPPY CELEBRATIONS set and centered it over the oval that I had glued onto on the card base. I then glued the snowflake slimline panel in place to finish the card.

As a final touch, I added a few GOLD SPARKLE CRYSTALS.

I hope you were inspired by this snowflake slimline Holiday Set of Cards. There are so many possibilities you can take this idea using different stamps and different colors. If you aren’t into the Slimline Cards you could use the same idea to create 4 backgrounds for A2 sized cards.

Thank you for stopping by and until next time… Happy Crafting!

Hugs, Ilda

Connect with me also on my Blog, Facebook Page, Instagram, and YouTube

SUPPLIES

SNOWFLAKES Shop at: SK	HAPPY CELEBRATIONS Shop at: SK	POINSETTIA BORDER Shop at: SK	DOTTED SLIMLINE – SET 1 Shop at: SK
DOTTED SLIMLINE – SET 2 Shop at: SK	CHUNKY ALPHABET Shop at: SK	CLEAR ACETATE SHEETS Shop at: SK	Vellum Value Pack Shop at: AMZ
CRYSTAL STARS Shop at: SK	SPARKLING SEA CONFETTI MIX Shop at: SK	GOLD SPARKLE CRYSTALS Shop at: SK	GOLD FOIL PEARLS Shop at: SK
TRIANGLE TRAY Shop at: SK	EMBELLISHMENT WAND Shop at: SK	STUDIO KATIA GLUE Shop at: SK	BLACK FOAM TAPE Shop at: SK
JUICY INK Shop at: SSS \| HBS \| IO3	GOLD RUSH EMB. PWD. Shop at: SSS \| IO3	BLACKOUT INK Shop at: SSS \| HBS \| IO3	GEMINI JR. DIE CUTTER Shop at: SSS \| AMZ \| SB
ORIGINAL MISTI Shop at: SSS \| AMZ \| HBS	SSS 2.5 Inch ACRYLIC BLOCK Shop at: SSS	SSS 3.5 Inch ACRYLIC BLOCK Shop at: SSS

Happy Boo-day by Tracey

October 9, 2020 / CATEGORIES - Autumn/Fall Cards, Cards, Halloween, Shaker Cards

Hey there crafty peeps! I have a couple of friends who have a birthday right around Halloween, so it’s always fun to make a Halloween inspired birthday card for them each year.

I have a slimline card today that could be a birthday card or it could be a just a Halloween card. I cut two panels of Bristol Smooth cardstock using the large rectangle from the Dotted Slimline Set 1 dies. Using the Birthday Balloons Duo Stencil I ink blended balloons of different sizes on the panel using the Studio Katia Blending Brushes. I used Wilted Violet, Mowed Lawn, Spiced Marmalade and Black Soot Distress Oxide inks. The panel was adhered to a 3 1/2″ x 8 1/2″ card base in landscape format.

Using the second panel of Bristol Smooth cardstock I ink blended with Twisted Citron, Moved Lawn and Black Soot Distress Oxide ink. I cut the panel using the large oval from the Dotted Slimline Set 1 dies. Then I backed the opening with acetate to make a shaker window. Using Studio Katia Black Double Sided Foam Tape I made a double thickness well around the shaker window. Then I added some Studio Katia Spooky Satin Confetti onto the centre of the balloons on the card base. I spread them out a bit with my fingers so they weren’t stacked up too much. I removed the tape baking from the top panel and secured it over the card base securing the shaker.

The ‘happy’ sentiment from the Happy Celebrations stamp set was white embossed onto a strip of black cardstock cut from the Halftone Lines Cover die, this die is a staple in my craft room. I love that it cuts so many line widths all with a perfect rounded edge. I adhered it on an angle above the oval.

I cut my punny sentiment from the Studio Katia Chunky Alphabet dies with purple sparkly cardstock and I adhered it to the centre of the clear window with Studio Katia Glue. A little trick I use to when I have a sentiment made up of individual letters to keep them spaced out evenly, I lay them on to my work surface and I picked them all up using a strip of purple tape. Then I can flip it over, add liquid glue to the backs of the letters and then put it on to my project exactly where I want it to do. I leave it until the glue dries and then remove the purple tape. Works like a charm.

Hope you enjoyed making a card with me today. A Halloween inspired card made with just a birthday balloon stencil, alphabet dies and a bit of ink. Thanks for dropping in and have a great day!

Supplies–>
Dotted Slimline Set 1
Birthday Balloons Duo Stencil
Happy Celebrations stamp set
Halftone Lines Cover die
Studio Katia Chunky Alphabet dies
Studio Katia Blending Brushes
Studio Katia Spooky Satin Confetti
Studio Katia Black Double Sided Foam Tape
Studio Katia Embellishment Wand
Sudio Katia Triangle Tray
Studio Katia Glue

NEW! Birthday Cardmaking Kit and Free online class

October 1, 2020 / CATEGORIES - Birthday Cards, Cards, CAS, New Release, News, Shaker Cards

Hello everyone! It’s Galina with you today and I want tell you about super cool cardmaking kit from Studio Katia! It’s a special kit which comes with free online class! Clear & Fancy online class is all about making cards with acetate sheets and gorgeous embellishments. The was specially designed for Great Canadian Virtual Scrapbook Carnival hosted by Creative Scrapbooker.

This is a limited edition and our first cardmaking kit. It is only available while supplies last so if you love it—do not wait!

The contents of this kit include:

– 4 random cardstocks from Black, White & Rainbow Pack
– 4 acetate sheets
– 1 Chunky Sprinkles Stencil (not yet released)
– 1 Mini Birthday Greeting stamp set (not yet released)
– 1 Mini Birthday Cake stamp set & Coordinating Die
– 1 Chunky Sparkle glitter jar
– 1 Sparkling Crystals
– 1 Iridescent Crystals
– 1 Chunky Sprinkles
– 1 Rainbow Crystals Mix (only available with this kit)
– 1 ink blending brush
– 20 foam squares

With this kit you can create a bunch of beautiful birthday cards. Here are some examples.

Shaker cards:

Simple coloring cards:

If you want to get inspired more you can watch Clear&Fansy online Class HERE in Great Canadian Virtual Scrapbook Faceboo Group. (You probably should join the group). More about this event HERE.

In this class I show how to create two birthday cards using Cardmaking Kit.

The first card – with a clear box and cake inside + stenciling and heat embossing tips.

Second card – with unusual form of a shaker + simple coloring with Alcohol markers.

I hope this class will help you to get inspired and create fancy cards for your friends and family. Everyone loves shakers cards 🙂

Some of the products from the kit you can buy separately, I’ll link them below, but a big sentiment stamp and stencils you can buy only with kit.

Supplies

https://linkdeli.com/widget.js?id=f5e8378456858c916708

Halloween Shaker Card with Dana

September 28, 2020 / CATEGORIES - Autumn/Fall Cards, Cards, Halloween, Shaker Cards

Happy Monday, Studio Katia friends!

It’s Dana here and I hope you had a wonderful weekend. Today, I’m sharing a Halloween shaker card and let’s get started!

To begin, I die cut three circles from white card stock for card base and stamping and one circle from black card stock for window. I die cut one more from Acetate Sheets as well. For this step, I used big circle die from Halftone Dots Circle Dies.

I then die cut black one again with Fancy Circle and adhered them on acetate circle one using Glue.

Next, I stamped Spooky Pumpkins Trimmings in black and colored images in with Alcohol markers. I cut this trimmings using scissors and glued it on right back of acetate panel.

For background, I ink blended it using Distress Oxide Inks and stamped small spider webs from Meowy Halloween.

I mixed Storm Cloud Pearls, Mallow Crystals and Royal Purple Crystals and built a shaker using Double Sided Foam Tape (Black). Then, I mounted a shaker onto card base I made in previous step.

To finish, I stamped a sentiment from Meowy Halloween in silver and trimmed it using craft knife.

That’s it for today! Thank you so much for stopping by and happy crafting!

Dana

Supplies

HELLO with Natalia

September 25, 2020 / CATEGORIES - Cards, Floral Cards, Hello Cards, Shaker Cards

Hi there! It’s Natalia here. Today I want to share with you my card featuring beautiful Studio Katia PEONY TRIMMINGS stamp Set and CHUNKY ALPHABET Creative Die.

First, I stamped lovely image from the PEONY TRIMMINGS stamp set. I colored it with copic markers and cut out with scissors. I added highlights using white and silver gel pen.

Next, I blended some distress inks onto a white piece of paper and die cut out a panel out of ivory cardstock using a frame die from DOTTED PATTERNS SET 4.

I adhered the image onto my background panel using double-sided foam tape. I die cut out the word Hello out of golden glittered cardstock using CHUNKY ALPHABET Creative Dies and adhered the letters in the middle of the clear window using double-sided foam tape.

I die cut out 2 frames out of foam to make a shaker. I filled it with SPARKLING CRYSTALS, MALLOW CRYSTALS, ROUGE PINK CRYSTALS, PINK CARNATION CRYSTALS, PINEAPPLE DELIGHT CRYSTALS, CRYSTAL CLEAR CONFETTI, 3M CRYSTAL CLEAR, SILVER DUST.

I adhered the panel onto white card base using double-sided foam tape.

Thank you so much for join me today, have a great day!

Natalia

SUPPLIES:

PEONY TRIMMINGS

PEONY TRIMMINGS DIES

DOTTED PATTERNS SET 4

CHUNKY ALPHABET Creative Dies

SPARKLING CRYSTALS

MALLOW CRYSTALS

ROUGE PINK CRYSTALS

PINK CARNATION CRYSTALS

PINEAPPLE DELIGHT CRYSTALS

CRYSTAL CLEAR CONFETTI

3M CRYSTAL CLEAR

SILVER DUST

Craftastic Birthday Shaker by Tracey

September 1, 2020 / CATEGORIES - Birthday Cards, Cards, Shaker Cards

Hi there, it’s Tracey here today with a shaker birthday card using the Craftastic Stamp set and matching Craftastic dies.

The first step was to create a background using the Ink Splash stencil and some Distress Oxide inks. I masked and blended Twisted Citron, Mowed Lawn, Wild Honey, Spiced Marmelade and Wilted Violet Distess Inks using the Studio Katia Blending Brushes. One done the panel was trimmed down to 5 1/4″ x 4″.

The Craftastic mug image was stamped twice. Once on white cardstock and then a second time in black and clear embossed on to watercolour cardstock. The mug and the crafty goodies inside were coloured with watercolours. I added a fitted piece of Studio Katia Acetate to the back of the watercoloured piece.

To assemble the shaker the inside shaker element was cut from the mug and the shaker was built on the ink blended panel from the bottom up. The cup image was cut from a sheet of double sided foam adhesive and placed over top of the regular die cut. The centre of the mug was inlaid into the foam die cut and some Iridescent Crystals were put into the well using he Studio Katia Embellishment Wand. The watercoloured piece was added over the top.

The sentiment is from the Birthday Greetings stamp set and was stamped in black ink directly on to the ink blended background. The panel was added to the white card base with Studio Katia White Foam Tape. This adds dimension especially when you are adding a primarily white panel on to a white card base.

Thanks so much for stopping in today.

SUPPLIES–>
Craftastic Stamp set
Craftastic dies
Ink Splash stencil
Birthday Greetings stamp set
Studio Katia Blending Brushes
Studio Katia Embellishment Wand
Studio Katia Acetate
Studio Katia White Foam Tape

Love You Lots with Emily

August 20, 2020 / CATEGORIES - Cards, Floral Cards, Shaker Cards, Winners

Happy Thursday! Today’s feel-good card features the Chunky Alphabet die set and the Flourishing Note stamp set. I love alphabet dies so it’s only natural to fall in love with this die set. They’re the perfect size for customizing sentiments that take centre stage on a card.

I started by lining up Chunky Alphabet dies to spell out the words and cutting them from the front panel. I used a ruler to draw lines in pencil to help me space out the three lines. After all the letters were die cut from the panel, I erased the pencil lines.

On the second panel, I stamped, heat embossed and watercoloured the Flourishing Note stamp set. The finished piece was so lovely that it was hard to cover up with the die cut panel. I think I will have to make another one just like this and let it shine!

I smooshed several mini distress ink pads on to an acrylic block, sprayed it with water and smooshed it on to the front panel for a light wash of colour. After it dried completely, I added an acetate sheet and popped it up with foam tape to create a shaker behind the word YOU. I combined Luminous Lavender Fusion, Mallow Crystals and Vanilla Luster Fusion sequins, and purposely left out the centres of the Os to allow the beautiful flowers to show through.

Please visit me on my blog, Instagram and YouTube channel for more inspiration. Thanks so much for stopping by!

Emily

The winner of the $25 Gift Certificate to Studio Katia Online Store is:

CAROL

Congratulations!!! Please send an email to studiokatiagiveaway@gmail.com with a subject New DT Member Giveaway Winner to claim your prize.

Supplies:

Chunky Alphabet

Flourishing Note

Luminous Lavender Fusion

Mallow Crystals

Vanilla Luster Fusion

Acetate Sheets

Glue

Double-Sided Foam Tape – White

Happy Birthday Slimline Shaker Card

August 12, 2020 / CATEGORIES - Birthday Cards, Cards, New Release, Shaker Cards

Happy Birthday Slimline Shaker Card, Studio Katia, Slimline Card, Birthday, Shaker Card, Card Making, Stamping, Die Cutting, handmade card, ilovedoingallthingscrafty, Stamps, how to, Rainbow, Mini Birthday Cake, Chunky Alphabet,

Hello, my Friends, Ilda here and Happy Wednesday!

I have a fun Birthday Slimeline shaker card to share with you all today. I love making slimline cards and since this is a birthday card, I thought making it interactive would be fun for the recipient.

CARD DETAILS

To begin I stamped the cute little MINI BIRTHDAY CAKE and die cut it using the coordinating MINI BIRTHDAY CAKE DIE. I then colored the image in using Copic Markers.

The next step was to die cut all the pieces for the shaker card. I first die cut the larger frame from the DOTTED SLIMLINE – SET 2. I then die cut the center of the panel using the oval dotted frame from the DOTTED SLIMLINE – SET 1. Behind the slimline panel, I glued a piece of acetate cut large enough to cover the window. To line the perimeter of the oval opening I used FOAM TAPE that I cut to about half of the width.

On the slimline card base, I glued a piece of rainbow pattern paper from the BLACK, WHITE AND RAINBOW PAPER pack. Since the slimline is longer than the papers, I just extended the pattern by adding another piece of the same pattern that I cut to fit the card base. I then added the VANILLA LUSTER FUSION sequins to the center of the pattern paper and carefully lined up the front panel to create the shaker.

Next, I die cut the Birthday letters using the CHUNKY ALPHABET dies and added small pieces of BLACK FOAM to the back of each letter to add a bit of dimension and then attached them to the card front.

In place of the “A”, I just added the cute little birthday cake that I had previously colored. I also added the “happy” sentiment that comes from the HAPPY CELEBRATIONS set that I heat embossed in white on black cardstock and then fussy cut.

To finish off this fun and festive slimline birthday card, I glued on a few rainbow-colored pearls. See links below for the ones I used.

I hope this card inspired you today. Thank you for stopping by and until next time… Happy Crafting!

Ilda

Connect with me also on my Blog, Facebook Page, Instagram, and YouTube

SUPPLIES

MINI BIRTHDAY CAKE Shop at: SK	MINI BIRTHDAY CAKE DIE Shop at: SK	HAPPY CELEBRATIONS Shop at: SK	DOTTED SLIMLINE – SET 1 Shop at: SK
DOTTED SLIMLINE – SET 2 Shop at: SK	CHUNKY ALPHABET Shop at: SK	RIPE PERSIMMON PEARLS Shop at: SK	LEMON BURST PEARLS Shop at: SK
MOSS GREEN PEARLS Shop at: SK	AMETHYST PEARLS Shop at: SK	RADIANT ORCHID PEARLS Shop at: SK	VANILLA LUSTER FUSION Shop at: SK
BLACK, WHITE AND RAINBOW PAPER Shop at: SK	TRIANGLE TRAY Shop at: SK	EMBELLISHMENT WAND Shop at: SK	FOAM TAPE – WHITE Shop at: SK
FOAM TAPE – BLACK Shop at: SK	STUDIO KATIA GLUE Shop at: SK	NEENAH SOLAR WHITE 110 Shop at: SSS \| AMZ \| HBS	COPIC SKETCH Shop at: AMZ
MINI MISTI Shop at: SSS \| AMZ \| SBC \|HBS	1 Shop at: SSS \| HBS \| IO3	GEMINI JR. DIE CUTTER Shop at: SSS \| AMZ \| SBC	JUICY INK Shop at: SSS \| IO3
ARCTIC WHITE POWDER Shop at: SSS \| IO3	Grafix Acetate 9×12-Inch Shop at: AMZ	WHITE GELLY ROLLER PEN SET Shop at: SSS \| AMZ \| SBC	GLOSSY ACCENTS Shop at: SSS \| AMZ \| HBS

Video. Dawn scene shaker card

August 11, 2020 / CATEGORIES - Cards, Floral Cards, Hello Cards, Shaker Cards

Hello everyone! It’s Galina and I have for a beautiful dawn scene shaker card. I used a FANCY SQUARE die set, which is on sale now and fabolous floral stamp set – Together we bloom.

How I made this card you can watch here or on Studio Katia channel

To color those flowers I use a watercolor paints. I applied a dark blue paint on the bottom of each petal and a dark purple color on the top. I blend those color with water and add white splashes. I cut out the flowers with coordinating dies and placed them behind the black frame. Using fancy square dies I cut out one more frame from the gold glitter cardstock.

I fill the shaker base with black crystals and seed beads with beautiful name – gold dust, they made perfect combo for the dawn shaker card.

I cut out one more square panel from the dark blue cardstock in size of 5 inch and I’m attaching the shaker base on it.

Thanks so much for stopping by.

Galina

Supplies

https://linkdeli.com/widget.js?id=f5e8378456858c916708

Easy to Mail Shaker with Laura

July 24, 2020 / CATEGORIES - Floral Cards, Hello Cards, Other, Shaker Cards

Hi everyone! It’s Laura here and today I am back with an easy to mail slimline shaker card! Make sure to also check out the video at the end of the post for a step by step tutorial!

For the base of my card today I used the new Dotted Slimline Set 1 dies. I used them to cut both the base and the window of my shaker and I then ink blended the shaker background with Distress Oxides.

I used Speckled Egg, Milled Lavender and Dried Marigold and then spritzed everything with my Dylusions Shimmer Spray, for some extra sparkle. To create some dimension in my shaker, I die cut three sheets of heavyweight white cardstock to be the same as the shaker front. I layered them together and filled the shaker with a mix of chunky glitter and confetti.
Layering cardstock rather than using foam tape will keep the shaker a bit flatter, so that it is easier to mail.