Other – Page 5

Thanksgiving Inspiration Cards

September 30, 2020 / CATEGORIES - Autumn/Fall Cards, CAS, Floral Cards, Other, Thank You Cards

Thanksgiving, Studio Katia, Autumn Borders, Mini Arcs Stencil, Pearls,Karin Brush Marker Pro,Card Making, Stamping, Die Cutting, handmade card, ilovedoingallthingscrafty, Stamps, how to, card

Happy Wednesday Friends, Ilda here!

I am back today with a few Thanksgiving Inspiration Cards. Even though 2020 has been such a terrible year for all of us around the world, there is still so much to be thankful for.

CARD DETAILS

I began these cards by stamping out the images from the AUTUMN BORDERS stamp set (which by the way is currently on sale if you are interested). I used VersaFine Onyx Ink and then heat set it with a clear embossing powder so that I could do some really easy water coloring using Karin Brushmarkers.

Once the images were dry I die cut them out using the coordinating AUTUMN BORDERS DIES. Under each die-cut, I left enough room to add a sentiment from the AUTUMN BORDERS set and then trimmed excess paper underneath.

I then popped up the strips using foam tape and attached them to these beautiful backgrounds and finished them off by adding some pearls. On this card, I used the AMETHYST PEARLS.

To create these beautiful backgrounds, I used the MINI ARCS STENCIL, and I created my own gold paste (because I didn’t have any) by mixing Platinum Embellishment Mousse with a little bit of Solar Flare Shimmer Powder.

Doesn’t the pattern remind you of acorn tops? Such a pretty design and I just love the texture this paste created.

To finish off this card I added WINE BERRY PEARLS. Love how these cards turned out!

I hope these Thanksgiving cards inspired you today. Thank you for stopping by and until next time… Happy Crafting!

Ilda

Connect with me also on my Blog, Facebook Page, Instagram, and YouTube

SUPPLIES

AUTUMN BORDERS Shop at: SK	AUTUMN BORDERS DIES Shop at: SK	MINI ARCS STENCIL Shop at: SK	EMBELLISHMENT WAND Shop at: SK
WINE BERRY PEARLS Shop at: SK	AMETHYST PEARLS Shop at: SK	STUDIO KATIA GLUE Shop at: SK	MINI MISTI Shop at: SK
BRISTOL PAPER Shop at: SSS \| AMZ	VersaFine ONYX BLACK Ink Shop at: SSS \| AMZ \|HBS	CRYSTAL CLEAR Emb Pwd Shop at: SSS \| IO3	KARIN BRUSH MARKER PRO Shop at: SSS \| AMZ
MED. WATER BRUSH Shop at: IO3	MEDIA SPATULAS Shop at: SSS \| HBS \| TS US \| TS UK	Pure Platinum Emb. Mousse Shop at: TS US \| TS UK	Shimmer Powder Solar Flare Shop at: TS US \| TS UK

Slimline Winter Card with Laura

September 24, 2020 / CATEGORIES - Other

Hi everyone! It’s Laura here and today I am back with a slimline winter card and a video showing how to make it!
The stamp set I used for this card is the adorable Happy Snowmen – I love this set so much and I couldn’t wait to finally be able to play with it!

I went for a rather clean Slimline card today, and I used the Dotted Slimline Set 2 to create the card base. I die cut some light blue and white cardstock and I glued them together.

The images were colored with Illustrator alcohol markers and die cut with the Happy Snowmen coordinating dies.

For the sentiment I used stamps from the Poinsettia Border stamp set and I also added a few Iridescent Snowflakes to decorate the card.

I added some puffy snow at the base of the snowmen with a Marvy Uchida Snow Marker and that finished off my card.

As promised, here is also a video tutorial for you showing the step by step process. I hope you like it!

Thank you all for stopping by and have a great day!
Laura

https://linkdeli.com/widget.js?id=f5e8378456858c916708

Border stamping

September 22, 2020 / CATEGORIES - Other

Hello everyone its Galina. Today I’m going to show super quick super easy and super one layered card. I’ll be focusing on the border stamping and masking technique.

How to made this card you can watch here or Studio Katia channel

On this card I’ll combining some tiny stamps with bigger ones to create a different sized border scene. On my first plan I want to see those small candles, so I’ll stamp them first. I m stamping directly on the card base using memento black ink. Also I stamped a spooky pattern using a spider web stamp seta skull stamp wiht purple ink. I colored all the images with copic markers.

Using a spider web stencil Icreated a pattern on the top of the card. I deocrate the card with jewe lgreen crystals.

Thanks for stopping by.

Galina

https://linkdeli.com/widget.js?id=f5e8378456858c916708

Lunchbox Notecards with Emily

September 21, 2020 / CATEGORIES - Back To School Cards, Other

My son had a very successful first week at school and I hope for more of the same this week. It’s been a long time since I made him lunchbox notecards and I think it’s a great time to surprise him again. I wanted to make something cute, of course, yet different so the Slider Tag Die made its maiden voyage through my craft room.

Those of you who’ve been following me for a while know that my son loves to play Minecraft and has dressed his player as a Creeper ever since he first started playing. He even dressed as a Creeper for Halloween three years ago. Since there are no Minecraft emojis, we use the cactus emoji to represent the Creeper. Hence, the use of the Cactus Hugs stamp set for these little notecards.

The coloured images, top layer and pull tab were all die cut from watercolour cardstock and the back was die cut from kraft cardstock. All of the images and sentiment, from Potted Plants, were heat embossed. I used distress inks to watercolour the images and ink blend both the top layers and pull tabs. I misted the top layers with shimmer spritz, attached the images with foam tape and added coordinating hemp cord to finish.

Please visit me on my blog, Instagram and YouTube channel for more inspiration. Thanks so much for stopping by!

Supplies:

Double Sided Foam Tape – White

Hey BOO! | Halloween Light Up Interactive Card

September 15, 2020 / CATEGORIES - Autumn/Fall Cards, Cards, Halloween, Hello Cards, Other

Halloween, Light Up, EZ-Light Pack, Interactive Card, miss you, pumpkin,Studio Katia,Chunky Alphabet, Card Making, Stamping, Die Cutting, handmade card, ilovedoingallthingscrafty, Stamps, how to, card

Well Hey, Boo!

Ilda, here. Today I have a special little card for you! Not only is this little pumpkin adorable, it is also interactive and lights up for the recipient. How fun is that?! I am so addicted to these new to me EZ-lights that I’m sure you will be seeing a lot more of these light-up cards in the future!

CARD DETAILS

Here is how I made this card:

Die-cut 2 HALF STRIPED COVER frames, one orange, and one purple.
Rotate one Striped Cover over the other 90 degrees and glue together onto a white card panel.
Die-cut the top, bottom, and frame pieces for the pumpkin using the SHAKER PUMPKIN DIES
Glue the bottom of the pumpkin onto the center of the card panel.
Punch a hole through both the card panel and the pumpkin base (somewhere where it won’t be seen from the face openings.
Add vellum behind the pumpkin face and add foam tape to the outer edges of the pumpkin’s face.

Thread the EZ-Light wire from behind the panel through the hole you punched through the panel.
Tape down each EZ-Light so that the light is able to shine through the vellum areas of the pumpkin’s face. ( I taped them behind the top orange pumpkin layer)
Line up the pumpkin’s face with the back layer and adhere them together with the foam tape.
Glue down the pumpkin’s frame around the pumpkin.
Insert the battery and tape down the EZ-Light push button behind the area you want the recipient to push down on. Test the push area.
Tape the excess wires to the pack of the card panel, leaving room along with the edges to add foam around the border.

Attach to the card base.
Die-cut the letters from glitter craft foam using the CHUNKY ALPHABET and arrange and press onto the card front.
Instead of writing push or press on the area, I used the Miss You stamp from the SWEET HEART CANDY.
To finish, embellish with your favorite bling. (I used RIPE PERSIMMON PEARLS and AMETHYST PEARLS).

Now let’s see how cool it looks when you light it up!

How cool is that right?

I hope you were inspired by this fun Halloween Light Up Card. I’m already planning my next one, lol! Make sure you are following me on Instagram, I will post a quick video of the card coming together.

Thank you for stopping and until next time… Happy Crafting!

Ilda

Connect with me also on my Blog, Facebook Page, Instagram, and YouTube

SUPPLIES

HALF STRIPED COVER Shop at: SK	CHUNKY ALPHABET Shop at: SK	SHAKER PUMPKIN DIES Shop at: SK	SWEET HEART CANDY Shop at: SK
RIPE PERSIMMON PEARLS Shop at: SK	AMETHYST PEARLS Shop at: SK	EMBELLISHMENT WAND Shop at: SK	WHITE – EMBELLISHMENT WAND TIP Shop at: SK
TRIANGLE TRAY Shop at: SK	GEMINI JR. DIE CUTTER Shop at: SSS \| AMZ \| SB	NEENAH SOLAR WHITE 110 Shop at: SSS \| AMZ \| HBS	Foamies Sticky-Back Glitter Sheet Shop at: AMZ
FOAM TAPE – BLACK Shop at: SK	STUDIO KATIA GLUE Shop at: SK	EZ-LIGHT (5) PACK Shop at: PBP

Light Up Halloween Card with Laura

September 10, 2020 / CATEGORIES - Other

Hi everyone! It’s Laura here and today I am back with a light up Halloween card featuring the Meowy Halloween stamp set and a video tutorial, too! This card was so fun and easy to make – don’t forget to check out the video at the end of this post to see the step-by-step process!

The images in today’s card are part of the super cute Meowy Halloween Stamp set. They were colored with Triblend Alcohol Markers. . Here is the list of markers I used

Cat: Ice Gray Blend
Hat: Ice Gray Shade
Green: Apple Green Blend
Orange: Burnt Orange Blend
Teal: Aqua Blue Blend
Pink: Magenta Blend
Purple: Pink Violet Blend
Cat’s Ears: Fair Skin Blend

Once I was done coloring, I die cut the images with the coordinating dies.

For the card base, I used the Darling Ribbon and Frames dies and die cut some black cardstock.

I then die cut two panels out of watercolor cardstock using the Dotted Patterns Set 3 dies and the Loops dies. I added color to these panels using Distress Oxide Sprays in Seedless Preserves, Picked Raspberry, Wild Honey and Carved Pumpkin.

I also blended the edges of the panels with Distress Ink in Black Soot for some extra spookyiness!

For the light up part of the card I used EZ-Lights – they are really easy to use and in the video I share how I added them to this project. The LED lights shine through some spooky faces that I created using the Meowy Halloween coordinating dies. I have to say that I really had a lot of fun creating this card!

Next, I adhered the images and my sentiment, too and then moved on to finishing touches. I added Exotic Onyx Pearls and coated some of the images with a glitter brush pen and Glossy Accents.

And that’s it for my card! Don’t forget to check out the video tutorial below to see the step by step process!

Thank you all so much for stopping by and have a great day!

Laura

https://linkdeli.com/widget.js?id=f5e8378456858c916708

Quick tips for the one layer card

September 8, 2020 / CATEGORIES - Other

Hello everyone! It’s Galina.

Today I’m going to use two my favorite techniques at one time to create a super quick and pretty thank you card.

How I made this card you can watch here or on Studio Katia Youtube channel

At first I cut out the white panel using the biggest dir from DOTTED PATTERNS SET 3 . Also, on this card I used a beautiful stamp set – A CUP OF THANKS. I masked it and applied green ink through the SQUARE BRICK STENCIL.

I colored the stamped images with Copic markers, to color the cuo I used W000, W01, W03; red flowers R12, R00, YR65; leaves G20, G21.

To embelish the card I add a few white mat crystals between the flowers.

Thanks for stopping by.

Galina

Supplies

https://linkdeli.com/widget.js?id=f5e8378456858c916708

Best Wishes Birthday Card with Ilda

August 31, 2020 / CATEGORIES - Birthday Cards, Cards, CAS, New Release, Other

Best Wishes, Birthday Card, Studio Katia, Mini Birthday Cake, Celebration, Card Making, Stamping, Die Cutting, handmade card, ilovedoingallthingscrafty, Stamps, how to,

Hello Friends, Ilda here.

Can you believe it’s the last day of August today?! I am trying to hold on to every minute of Summer still because our Fall Season is super short. And, that means a long cold Winter will be here soon. Eeek! Anyways, August was a busy birthday month for us and so I have another cute and simple birthday card to share with you.

CARD DETAILS

Here’s how you can recreate and make something similar:

Stamp out the MINI BIRTHDAY CAKE using no-line color ink.
Color in the image (Copic Markers used).
Die-cut the image using the MINI BIRTHDAY CAKE Coordinating Die.
Add details to image, white gel pen highlights, glitter pen, and Glossy Accents to candle flames.

Die-cut Background Panel using HALFTONE DOTS COVER DIE and glue onto a colored cardstock piece trimmed to size, then adhere it to the card base.
Add foam behind MINI BIRTHDAY CAKE image and adhere to the card front.

Stamp sentiment from TRIMMINGS SAYING ONE and die cut using the SIMPLE TRIMMINGS coordinating die. Cut extra banners to glue together for extra thickness.
Glue the banner under the Birthday cake image.

Embellish background with SKY BLUE CRYSTALS using SK GLUE, EMBELLISHMENT WAND, and the TRIANGLE TRAY to make the process a lot easier.

Hope you found the directions easy to follow and that this simple Best Wishes Birthday Card inspired you.

Thank you for stopping by and until next time… Happy Crafting!

xox, Ilda

Connect with me also on my Blog, Facebook Page, Instagram, and YouTube

SUPPLIES

MINI BIRTHDAY CAKE Shop at: SK	MINI BIRTHDAY CAKE DIE Shop at: SK	HALFTONE DOTS COVER DIE Shop at: SK	TRIMMINGS SAYING ONE Shop at: SK
SIMPLE TRIMMINGS Shop at: SK	STUDIO KATIA GLUE Shop at: SK	SKY BLUE CRYSTALS Shop at: SK	EMBELLISHMENT WAND Shop at: SK
TRIANGLE TRAY Shop at: SK	FOAM TAPE – WHITE Shop at: SK	NEENAH SOLAR WHITE 110 Shop at: SSS \| AMZ \| HBS	MINI MISTI Shop at: SSS \| SK \| HBS
FADEOUT INK Shop at: SSS \| IO3	BLACKOUT INK Shop at: SSS \| IO3	COPIC SKETCH Shop at: AMZ	GEMINI JR. DIE CUTTER Shop at: SSS
Gelly Roll Stardust Pen Shop at: SSS	WHITE GELLY ROLLER PEN SET Shop at: SSS	GLOSSY ACCENTS Shop at: SSS

Watercolor Galaxy Card with Natalia

August 28, 2020 / CATEGORIES - Cards, CAS, Other

Hi there! It’s Natalia here. Today I want to share with you my card using beautiful Studio Katia supplies from the latest release – CHUNKY ALPHABET Creative Die.

First, I took a piece of watercolor paper and coloured it with Gansai Tambi watercolor paint. Once it was dry I added splatter with white, golden and silver paint.

I die cut the words out of golden glittered cardstock using a die from CHUNKY ALPHABET Creative Die. I adhered the image onto my background panel using double-sided foam tape.

Thank you so much for joining me today, have a great day!

Natalia

SUPPLIES:

CHUNKY ALPHABET Creative Dies

No-Coloring Halloween Card with Laura

August 27, 2020 / CATEGORIES - Other

Hi everyone! It’s Laura here, and today I am back with a fun Halloween slimline card that does not require any coloring! As always, there is a video tutorial that shows the entire card making process – you will find it at the end of this post.

This card was inspired by the one in the picture above. I made this cute last week, during my weekly live stream on the Studio Katia page – you can watch the replay here and find the supplies for the card here. You can also join me every Thursday, including today, at 2 PM ET, if you enjoy crafty lives! There is also a 15$GC that is given away each week – one more reason to watch! 😉

Back to today’s card, I decided to use the Shaker Pumpkin Die for my focal point and the Dotted Slimline Set 2 for my card base. I die cut all the elements out of colored cardstock and added some shading with Distress Inks!

I used Wilted Violet and Black Soot on the purple panel, where I also used the Spider Web stencil. For the green panel I used Lucky Clover, Pine Needles and Black Soot Distress Inks.

I added some droplets for an additional fun effect and I stamped images from the Meowy Halloween stamp set on the green panel. This way I created a custom patterned paper effect, which adds even more interest to the project. The sentiment, from the same set, was heat embossed with clear embossing powder.

For the pumpkin, I started from some orange cardstock, that I shaded with Ripe Persimmon and Black Soot Distress Inks. I cut the leaf and the stem out of some green cardstock and blended Lucky Clover and Black Soot Distress Inks on top.

I also created spiderwebs out of dark grey cardstock. I used the Spider Web Shaker die, Distress Ink in Black Soot and FSJ Ink in Whip Cream.

I then coated some elements of the card with a glitter brush pen and finished everything off with some Seafoam, Amethyst and Onyx Black Pearls.

And that’s my card for today! Don’t forget to watch the video below for a step by step tutorial and make sure to subscribe to the Studio Katia channel for more inspiration!

Thank you all for stopping by and have a great day!

Laura

« Previous Page
1
…
3
4
5
6
7
…
25
Next Page »