Valentines Day Cards

Hugs and Kisses! with Kelly | Welcome New DT Member!

January 20, 2020 / CATEGORIES - Valentines Day Cards

Hello Everyone! We have another exciting announcement today – very talented Kelly Martin has joined our fabulous Design Team! Help us celebrate the news and welcome Kelly to SK family in the comments below. It will also give you a chance to win a $15 Gift Certificate to Studio Katia Store.

———————————-

Welcome, friends!

I’m so happy to be here on the Studio Katia blog for my first post as part of the design team.

Today we’re going to be creating a clean card, using very minimal supplies!

Using the scallop hearts cover die, cut out two panels of the same color cardstock. Remove all the hearts in the middle of the die and set them aside to use on another project. Glue both of your panels together and then adhere them down to a cut and scored 4.25 x 5.5 inch card base.

Using the same background die, cut out a panel from a different color cardstock and then take out all the heart pieces. Set aside your panel to use on a different project later on.

Using a liquid adhesive. glue the heart pieces in to the center of each of the background heart openings on the card base. I recommend a liquid adhesive because you can have a second or two to move the heart around just a little bit in case you lay it down crooked!

To finish off the card, I stamped a sentiment from the Floral Wreath stamp set on to white cardtock. trimmed it down and then glued it on to a piece of gold glitter cardstock.

I glued that down to the top of the card at an angle and then to finish off the card, I die cut a bow from the Darling Ribbon and Frames in the same gold glitter cardstock and glued it on to the corner of my sentiment strip.

I love these background dies because you get so much value out of one die. With just one piece of cardstock and one pass through the die cut machine, the die cuts so many different pieces that you can use for multiple cards!

Thanks for joining me here today and I hope you’ll come back and see me next time!

Kelly

Supplies used:

Darling Ribbon and Dotted Frames

Scallop Hearts Cover

Floral Wreath

Plaid Background Valentine’s Day Card | Layering Die Technique with Ilda

January 15, 2020 / CATEGORIES - Valentines Day Cards

Hello crafty friends!

Today I have a super cute plaid card to share with you that I created by simply rotating and flippling one die. I love stretching my supplies to create something totally new!

To create the plaid. I used the HALF STRIPED COVER die to cut out 4 different shades of pink cardstock. I then layered each piece by either rotating or flipping the die-cut piece and glued them all together. To finish the background, I then glued the plaid layers onto a piece of red cardstock.

For the greeting, I used the stamps from KOBI’S HUGS and KISSES stamp set and to frame the sentiment I used the outer heart frames from the SHAKER HEART dies that I stacked and glued 3 times.

Here is a closer look at all the layers. To embellish the stamped hearts I added some liquid pixie dust for sparkle and then topped them off with glossy accents.

Super simple, and so pretty! The perfect card to give a friend or loved one for Valentine’s Day 💓 I hope you were inspired by this layering die technique.

Thank you for stopping by and until next time… Happy Crafting!

Ilda

Connect with me also on my Blog, Facebook Page, Instagram and YouTube

SUPPLIES:

Underwater card by Galina

August 19, 2019 / CATEGORIES - Cards, CAS, Other, Valentines Day Cards

Hello everyone! It’s Galina with you today and I want to share with you summer nautical card. I used small stamp set with mermaids and shell die.

I start with cutting few card panels one from dark blue cardstock and one from white cardstock. On the white card panel I applied blue, dark blue and violet colors of distress inks and then I add splashes with water.

In same way, I create a background for a shell. but in the end I decided to add dark blue stripes through the wave stencil. So, I cut out two shells, one from colorful panel and one from white cardstock and mixed negative die cuts.

Next I stamped and colored mermaid couple with watercolor markers. I foam mount shell and stamped image in the centre of my card.

At last I embellish my card with transparent bubbles. To glue them I used strong liquid glue from Studio Katia.

Thank you for stopin by!

Galina

Supplies

MERMAID FOR EACH OTHER

SEASHELL SHAKER

DOTTED PATTERNS SET 3

CLEAR DROPS MIX TWO

Jewel Picker Tool | Marvi Uchida

GLUE

TRIANGLE TRAY

Valentine’s Day Card with Dana

February 14, 2019 / CATEGORIES - Cards, Floral Cards, Valentines Day Cards

Happy Valentine’s Day, everyone!

It’s Dana here and I’d like to share my last Valentine’s Day theme card of this year 🙂

To start, I stamped Kobi and bouquet images from Kobi’s Hugs & Kisses Stamp Set onto cold pressed watercolor paper. I colored them with watercolor paints and water brush. Once dried, I die cut them with Coordinating Dies.

I took an A2 sized white card stock and die cut scallop frame using Fancy Circle. Before I adhered frame with its original panel, I randomly stamped flower images from You’re So Sweet Stamp Set in warm grey color.

Next, I mounted patterned paper onto white card base and covered it with floral panel with frame. I then die cut ‘best’ from black card stock using Best Ever Coordinating Die and stamped sentiment from Japanese Peony Stamp Set.

To finish off, I foam mounted Kobi and embellished with July Crystals as shown in the picture.

Hope you enjoyed this card. Thank you so much for joining me today!

Dana

Happy Valentines Day! with Natalia

February 8, 2019 / CATEGORIES - Cards, CAS, Valentines Day Cards

Hi there! It’s Natalia here. Today I want to share with you my card using beautiful Studio Katia supplies from the latest release – Kobi Bearing Gifts and KOBI’S HUGS & KISSES.

First, I stamped the cute images from the Kobi Bearing Gifts and KOBI’S HUGS & KISSES. Colored with copic markers and die cutting them with coordinating dies. I made highlights using white and silver pen.

Next, I blended some distress inks onto white piece of paper.

Placed all the elements on the paper panels using double-sided foam tape. Heat embossed the sentiment from And the Fox Says stamp set using white powder ( die cutting from vellum using coordinating dies).

Decorated everything with MAJESTIC CONFETTI and 3M CRYSTAL CLEAR

Thank you so much for join me today, have a great day!

Natalia

SUPPLIES:

Kobi Bearing Gifts Clear Stamp Set

Kobi Bearing Gifts Coordinating Dies

KOBI’S HUGS & KISSES STAMP SET

Kobi’s Hugs & Kisses Coordinating Dies

And the Fox Says Clear Stamp Set

MAJESTIC CONFETTI

3M CRYSTAL CLEAR SEQUINS

Love & Kisses Card with Dana

January 23, 2019 / CATEGORIES - Cards, Valentines Day Cards

Happy Wednesday, everyone!

It’s Dana here and I’m sharing a Valentine’s Day theme card today.

To start, I stamped images from Kobi’s Hugs & Kisses and colored them in with Copic markers. I die cut them using coordinating die set.

I then die cut banner from red card stock using Best Ever Coordinating Dies and white heat embossed a sentiment from Kobi’s Hugs & Kisses.

For background panel, I ink blended white card stock with Worn Lipstick and Tattered Rose Distress Oxide Inks. Then, I splattered red watercolor ink using paint brush and water. While it dried, I die cut another white card stock using Scallop Frames-Creative Dies twice.

To finish, I popped up all elements and embellished with October Crystals here and there.

Thank you so much for joining me today!

Supplies

KOBI’S HUGS & KISSES | STAMP SET

Kobi’s Hugs & Kisses | Coordinating Dies

Best Ever Coordinating Dies

SCALLOP FRAMES | CREATIVE DIES

Mermaid for Each Other Valentine Shaker Card by Ilda

December 31, 2018 / CATEGORIES - Cards, Valentines Day Cards

Happy New Years EVE Everyone, Ilda here with you today on the Studio Katia Blog to close out the year! I still can’t believe this year is over, it feels like I just blinked and the year was done. Can’t wait to see what 2019 will bring.

For my last card of the year, I have created this valentine shaker card featuring the cute Mermaid for Each Other stamps and Coordinating Dies. How cute are these little mermaid people ?

To begin this card I stamped out the mermaids onto Bristol paper and colored them in using Zig markers and then used the Coordinating dies to cut them out. Next, I die cut the top panel using first the Loops Creative Die and then the large frame die from the Darling Ribbons and Frames Die and then glued the acetate to the backside. I then played around to figure out where the little merpeople were going to peek through and glued them in place with foam to the acetate.

To create the underwater background I blended together a bunch of blue colored distress oxide inks from darkest to lightest leaving the top almost white. I then placed the Light Ray Stencil at the top of the ocean line and used a baby wipe to lift off some of the colors from the paper. To finish off the background I misted the paper with water and picked it up with a paper towel to create the look bubbles underwater.

The shaker mix consists of Silver Polka Fusion and Majestic Sequins plus some Just Chunky Confetti Glitter. Also for fun, I added Iridescent Bubbles onto the top of the card.

The sentiment was stamped onto a piece of paper that I had die cut using the small rectangle frame from the Dotted Patterns Set 2, and then die cut it again to create a smaller rectangle. The scripted Silver “love” comes from the Spring Bouquet Dies set and the heart was die cut from the Dotted Scalloped Oblong die set, to which I finished off by adding some glossy accents too.

Hope this Mermaid for Each Other Valentine Shaker Card inspired your Valentine creations. Thank you all for all the support and all the comments you have left for me here on my Blog and on my Social Media links! Wishing you all a safe and Happy New Year and I will see you all in 2019?

Hugs, Ilda.

SUPPLIES

MERMAID FOR EACH OTHER
MERMAID FOR EACH OTHER DIES
LOOPS: CREATIVE DIES
DARLING RIBBON & FRAMES DIES
DOTTED PATTERNS SET 2 DIES
SPRING BOUQUET DIES
DOTTED SCALLOP OBLONG DIE
LIGHT RAY | CREATIVE STENCIL
SILVER POLKA FUSION
MAJESTIC FUSION
JUST CHUNKY CONFETTI GLITTER
IRIDESCENT BUBBLES
STUDIO KATIA GLUE
TRIANGLE TRAY

No Colouring Valentine’s Day Card

December 17, 2018 / CATEGORIES - Cards, Valentines Day Cards

Hey lovelies, Tracy here with you today. I know that Christmas has even been here yet but love will soon be in the air for Valentines and I have decided to get a head and create a quick and no colouring valentines card using the cute Sweet Heart Candy Stamp set.

I started off stamping the solid heart randomly over a piece of card using 3 different colored Dye inks, when that was dry I then stamped different saying from the stamp set using black ink.

I used the Darling Ribbon & Dotted Frames die set to cut the panel out which I then set to one side whilst I stamped out the two hearts and added outline & faces to these and used the matching dies to die cut them out. Whilst I had my die cutting machine all set up I used the Love word die from the Spring Bouquet die set and cut some white glitter card and I also die cut a vellum heart.

To add a little bit more sparkle I used a clear glitter pen and went over both the hearts.

I adhered everything together, I popped one of the hearts up on foam tape and then used pop dots to adhere the vellum heart and give some dimension.

I know there is a few non colorist crafters out there so thats why I went with a non colouring card, this card could also easily be done with little ones and is so cute.

Thank you so much for stopping by today, I hope you all have a great day.

Supplies used –

Sweet Heart Candy Stamp set & Matching die

Darling Ribbons & Dotted frames die set

Spring Bouquet die set

Best Day Ever with Natalia

February 22, 2018 / CATEGORIES - Birthday Cards, Cards, Valentines Day Cards

Hello, everyone. Natalia is here. And today I would like to show multipurpose holiday card.

First of all I toned the background with distress inks of pink shades. Then, using Dotted Paterns: Loops, I cut the circles from the background to add volume to the card. I placed negative on washy tape, the circles became below it. After it I stamped Kobi’s Hugs Stamp; Kisses and Kobi the Birthday Bear on paper for markers and colored everything with Touch Twin and Copic Sketch alcohol markers

Using coordinating dies, cut everything out. Gave the bunch to Kobi and set him in bottom of the card and placed presents in front of him.

Using coordinating dies from Best Ever set I cut out according words (two workpieces per word) and stuck together to add volume. Then I stamped the word Day (Happy Valentines Day phrase) from And The Fox Says set on the strip of vellum using silver embossing. Stuck the sentiment on top of the card. At the end I put everything on the workpiece which I cut out using Dotted Patterns: Darling Ribbon die.

St.Valentines Day inspired me a lot, that’s why I chose pink but I believe this color could be changed to any other by desire and the card will still look spectacularly.

Thank you for stopping by and have a wonderful day!

Natalia

SUPPLIES:

Kobi’s Hugs & Kisses | Clear Stamp Set

Kobi’s Hugs & Kisses | Coordinating Dies

And the Fox Says

Kobi the Birthday Bear | Clear Stamp Set

Kobi the Birthday Bear Dies | Coordinating Die Set

Dotted Patterns: Loops | Creative Dies

Dotted Patterns Set – 1 | Creative Dies

Dotted Patterns: Darling Ribbon | Creative Dies

Best Ever | Coordinating Dies

For You Shaker Card with Kristina

January 31, 2018 / CATEGORIES - Cards, Shaker Cards, Valentines Day Cards

Hello everyone!

Kristina is here. Are you ready for St. Valentine’s Day? Today I want to show you a shaker card with adorable Kobi!

I’ve started by stamping the images from Kobi’s Hugs and Kisses stamp set on Neenah Solar White paper using blue inks. Then I blended some blue inks on my background to make a gradient look. Next, I stamped a Kobi and his heart using black ink and colored the images with Copic markers. After that I stamped the sentiment For You with clear embossing ink and white heat embossed.

Then I die cut shaker window out of white cardstock using die from Dotted Patterns Set 1 and put the shaker together adding Enchanted Sea Fusion, 3mm Majestic Sequins, Magic Hearts Crystals and Ocean Wave Crystals and adhered it all together with foam tape. To finished my card I foam mounted Kobi onto my shaker base and covered the heart with Nuvo Glaze as a final touch.